Some vehicles of the type listed above may experience problems with interior temperature control.
This could be due to a defect in the blender flap motor. The drive or adapter plate between the motor and the flap may be damaged.
A repair kit (drive and adapter plate) can be used to restore the flap to full functionality. The dashboard does not need to be removed in order to perform this repair. Depending on the model in question, the center console may need to be removed and subsequently reinstalled. Once repair work is complete, basic setting of the motor/flap controller will need to be carried out.
The necessary spare parts and further information are available from the Peugeot dealer in question.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful