If the above-mentioned problem is detected, a possible cause may be a faulty control unit of the power steering system.
Repair notes
In order to exclude other possible causes of malfunction, electrical and mechanical system tests (in accordance with vehicle manufacturer specifications) and also a fault code query using a suitable diagnostic unit should be carried out.
The following error codes can be set.
-C05D6 Power steering control unit, processor error
-U0131 Data bus, power steering control unit, no communication
If there are no further errors diagnosed, the control unit must be replaced.
It may be necessary to recalibrate the zero position of the steering wheel.
IMPORTANT
Please note that such repair work should only be carried out by an authorised specialist workshop and that the vehicle manufacturer's repair and maintenance instructions are to be observed!
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful