If complaints are made about the above-mentioned error and the engine goes into limp-home mode, the following fault codes could also be stored in the engine control unit.
Fault code:
- P0140
- P0571
- P0600
- P2101
A possible cause here is a too low battery voltage when starting the engine.
Remedial action involves checking/charging the battery or, if necessary, replacing it with a new one.
Finally the entries in the fault code memory are to be deleted with the appropriate diagnostic tool.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful