If the above-mentioned problem is detected, one possible cause may be the windshield wiper system and/or the wiper blades.
In such a case a faulty wiper arm (on the driver's side) is responsible for the noise generation.
Repair notes
First inspect the windshield wiper mechanism in order to check for any other form of malfunctioning and then repair if necessary.
Replace windshield wiper arm and also the wiper blade (on the driver's side) in accordance with the vehicle manufacturer's instructions.
Spare parts:
- Wiper arm (right) OE no. 76600-SJA-E02
- Wiper arm (left) OE No. 76600-SJA-G02
- Wiper blade (right) OE No. 76620-SJA-E02
- Wiper blade (left) OE no. 76620-SJA-G02
Finally a test drive should be undertaken in order to run a check on the repair work.
IMPORTANT:
Please note that such repair work should only be carried out by an authorized specialist workshop and that the vehicle manufacturer's repair and maintenance instructions are to be observed!
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful