In the above vehicles, the engine may cut out after briefly stepping on the accelerator pedal or running over a pothole.
What is striking here is that when the error occurs while reading the parameters, the injection volume drops to 0 mg/stroke.
The cause of the above error is an insufficient power supply to the engine control module, which is caused by a faulty fuse.
Fuses can be damaged through mechanical tension in the fuse box.
In this case, a hairline crack in the fuse (15 A) at slot 2.05 may be responsible for the error.
The problem can be remedied by replacing the faulty fuse.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful