Fiat Idea / Lancia Musa - Hazard warning signal switches on without being activated | HELLA
Fiat
Idea / Lancia Musa
Model year 2003 -2007
All models with manual temperature control
Hazard warning signal switches on without being activated
If the above-mentioned vehicles are found to have a problem with the hazard warning signal switching itself on without first being activated, the cause may be a defective hazard warning switch.
(Figure 1 / Figure 2 taking a Lancia Musa as an example)
Figure 1
An internal defect in the hazard warning switch triggers the activation of the hazard warning lights without the switch having been operated.
Repair notes:
We recommend the following procedure
- Remove heating control panel of the manual temperature control.
- Disassemble the heating control panel
- Replace/renew hazard warning switch (Figure 2)
- Assemble heating control panel in reverse order
This defect can also occur in other vehicle models that have identical components!
Figure 2
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful