The vehicles mentioned above can have a faulty starter relay that can cause the engine to not spin or start.
The relay which activates the starter may occasionally 'stick'. Consequently, the starter will not activate and the fault memory will store the error code P0657 (battery voltage before/after the main relay; voltage supply failure).
To remedy this problem, check the fuse (30 A) and starter activation relay and replace them if necessary. The fuse and relay can be found in the engine compartment fuse box.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful