Citroën C3 - error message from the automatic braking system
| Data sheet | |
|---|---|
| Manufacturer | Citroën |
| Vehicle model | C3 |
| Engine | All models |
| Year of manufacture | 2016 - 10/2019 |
| Symptoms | Automatic braking system error message |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Automatic braking system on Citroën C3 shows error message
On vehicles with Emergency Brake Assist, the error message mentioned above may suddenly appear in the instrument panel in German or English (automatic braking system fault). The message then usually appears at low speed or when the vehicle is stopped. Error codes have not been stored in the control unit
Check all system-relevant electrical and mechanical components, including the power supply, to eliminate the issue.
If a fault is not identified in this process, a software update may be necessary to eliminate the fault.
Software can be updated using Hella Gutmann macsRemote Services or a pass-thru-compatible Mega-Macs series diagnostic device. Furthermore, registered access to the vehicle manufacturer's online portal is required. If the appropriate equipment is not available, please contact an authorised specialist workshop.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful