In the vehicles specified above, an incorrect service programming or incorrect coding could cause the air-conditioning compressor to no longer be activated.
The signal of the On / Off switch of the air-conditioning system is forwarded to the vehicle electric system control unit.
This communicates with the engine control unit via CAN Bus. The compressor coupling relay is driven by means of the engine control unit. A diagnostics tool can not only read out the event memory, but can also check the function of the magnetic coupling by means of an actuator test. In addition, the diagnostics tool can "recognize" in what way the activating and deactivating signal of the switch arrives at the control unit.
If the fuses and wiring are OK, the activation circuit of the magnetic coupling and the switch have been checked, and the control unit does not contain any system-relevant error codes, then it may be possible to correct the problem by repeating the coding / service programming of the control unit.
This should be performed by an authorized dealer.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful