BMW F21 - tyre pressure monitoring system failed

Data sheet
ManufacturerBMW
Vehicle modelF21
EngineAny
Year of manufactureFrom 2011
SymptomsTyre pressure monitoring system

Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.

Tyre pressure monitoring system failed

The tyre pressure monitoring system may fail on the above-mentioned vehicle model.
The system must first be re-initialised in order to run a check on it. This procedure depends on each individual vehicle type and details can be found in the vehicle operating instructions.
If re-initialisation fails, first check the individual wheel electronics.
This can be done by using a suitable TPMS diagnostic unit.
Information on testing the TPMS sensors can be found in the Hella Tech World under the following section:
"Programming and training tyre pressure sensors"
If no direct fault is found in the periphery of the wheel electronics during troubleshooting, a possible cause of the fault can be a defective remote control receiver.
Replacing this can help here.

The remote control receiver is installed behind the C-pillar side panel in the luggage compartment on the right.

To replace the receiver, proceed as follows:

  • Remove the C-pillar panel in the luggage compartment using a suitable tool in accordance with the manufacturer's instructions
  • Remove the expanding rivet (Fig. A) using a suitable tool
  • Loosen the plug connection on the component
  • Remove receiver

Installation is carried out in reverse order.

Once the cause of the fault has been rectified, delete the error memory. Finally, the tyre pressure monitoring system is to be re-initialised on a test drive.

IMPORTANT
Please always follow the repair instructions from the vehicle manufacturer when carrying out such work.


This may also be of interest to you

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all

Very helpful

Please tell us what you did not like.
Many thanks. But before you go.

Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost There!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.