If the coolant temperature gauge fluctuates and/or the engine warning light comes on in the above-mentioned vehicles, a possible cause could be the presence of air locks in the cooling system or in the coolant circulation system. In such cases it is also possible that the P0128 fault code is stored.
The P0128 fault code refers to the following malfunction: coolant thermostat, coolant temperature below the thermostat regulating temperature.
We recommend using a radiator vacuum filling device to get rid of the source of the problem and/or to optimise the ventilation of the coolant circulation system.
For example:
- 8PE 185103-271 Hella Nussbaum Solutions
- (See Figure 1 + 2)
Please note:
After completion of repair work, the radiator vacuum filling device checks the cooling system to make sure it is airtight and then refills it, also ensuring that it is free of air bubbles. A radiator adapter with coupling nipple (See accessories) is also required to connect the radiator vacuum filling device to the expansion tank.
Figure 1
Figure 2
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful