MCC Smart - lamp adjustment
| Data sheet | |
|---|---|
| Manufacturer | MCC Smart |
| Vehicle model | 450 |
| Engine | All models |
| Year of manufacture | 1997-2007 |
| Symptoms | Adjusting lamps |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Adjustment of lamps
In order to be able to adjust lamps, they firstly have to be made accessible. To do this, please proceed as follows:
- Remove the ventilation grille on the left under the windscreen
- First turn the screw in the grille using a suitable tool in order to release the locking mechanism.
- Unclip the ventilation shaft and pull it out upwards
- The two adjusting screws are now visible and can be turned using an Allen key.
- Remove the ventilation grille on the right under the windscreen
First turn the screw in the grille using a suitable tool in order to release the locking mechanism.
The two adjusting screws are now visible and can be turned using an Allen key.
The lamps can now be adjusted using a suitable adjustment device/adjustment station in accordance with the vehicle manufacturer's specifications.
IMPORTANT
Please always follow the repair instructions from the vehicle manufacturer when carrying out such work.
This may also be of interest to you
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful