Oil pressure switch | HELLA
General
The oil pressure switch is installed in the oil circuit of the engine. It monitors the oil pressure and turns off or on a warning light or controls an oil pressure indicator.
Function
The oil pressure switch is normally closed.
When the ignition is switched on, the oil pressure warning light illuminates. When oil pressure is built up as the engine starts, the switch contact in the oil pressure switch opens and the ground contact for the warning light is interrupted. The warning light goes out.
Possible causes of failure
· Clogged inlet bore
· Contact failure on connector
· Internal short-circuits
· Damaged measuring element
· Loss of sealing
Effects of failure
· Warning light is illuminated permanently or not at all
· Oil pressure indicator not operational
· Oil leaks
Troubleshooting
· Check connectors and wiring for proper fit or damage.
· Check housing for leaks.
· Check engine connections and switch flange for contamination.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful