Function and assembly of the alternator freewheel clutch
Important safety note
The following technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Table of Content
- 1. Basics
- 2. Function
- 3. Benefits
- 4. Mounting instructions
Table of Content
1. Basics
Overrunning belt pulleys on alternators
2. Function
Function and structure of the alternator freewheel clutch
3. Benefits
Advantages of the alternator freewheel clutch
4. Mounting instructions
Installation instructions for alternator freewheel clutch
Important!
Refer to the removal and installation instructions from the relevant
vehicle manufacturer.
vehicle manufacturer.
- Installation may only be carried out by a qualified specialist
- Note tightening torque
- Do not use pneumatic tools
How helpful is this article for you?
Not helpful at all
Very helpful
5
4
3
2
1
Success
Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.
Success
Success
Success
Success
Success
Success
Success
Success
Error
Error
Please tell us what you did not like.
Success
Thank you for your feedback!
Wrong Captcha
Wrong Captcha
Error
Something went wrong
You might also be interested in
Basic Knowledge
TPS sensor – function & troubleshooting
Learn how to check a throttle potentiometer for defects and recognize the most common symptoms.
Reading time: 2 minutes
Basic Knowledge
Secondary air injection system: faults & overview
Structure and function of the secondary air system, common fault symptoms and causes of failure - knowledge for your workshop.
Reading time: 5 minutes

Basic Knowledge
Car airbag system – design & function
An overview of the airbag system: structure, function and diagnostic tips for safe repair and maintenance.
Reading time: 15 minutes

Basic Knowledge
Keyless Go & Keyless Entry system
Introduction to the Keyless Go system - from function and possible faults to diagnostics, ideal for vehicle workshops.
Reading time: 12 minutes

Basic Knowledge
Checking the exhaust gas temperature sensor
Step-by-step instructions for testing the exhaust gas temperature sensor - shown on the VW Passat 2.0 TDI.
Reading time: 3 minutes
Basic Knowledge
Injection nozzle/injection valve – Function & checks
Find out how to diagnose a defective fuel injector and replace it in the workshop.
Reading time: 6 minutes
Basic Knowledge
Accelerator pedal sensor – function & design
Important tips for checking the accelerator pedal sensor and rectifying defects - practical knowledge for your workshop.
Reading time: 3 minutes
Basic Knowledge
Throttle valve switch – function & troubleshooting
Everything you need to know to diagnose and repair the throttle valve switch - helpful workshop tips.
Reading time: 2 minutes
Basic Knowledge
Air-mass sensor - Function & troubleshooting
Learn how to check a mass air flow sensor, detect defective sensors and replace them professionally.
Reading time: 2 minutes
Basic Knowledge
Camshaft position sensor - function & troubleshooting
Learn all about the function and testing of the camshaft sensor and possible symptoms of a defect.
Reading time: 2 minutes