Engine starting problems may occur sporadically with the above-mentioned vehicle type. Error P302C and/or P0087 "Pressure on high-pressure fuel system too low" stored in the error memory of the engine control unit.

Since 2013, Hella Pagid has evolved into a leading full-range supplier of brake components. With HELLA's complete take over of Hella Pagid, from October 2024 the same premium brake products will be sold in the same high quality standards under the strong HELLA brand.

Who's that sneaking up behind you? Don't be alarmed - it's our HELLA Hero in blue and yellow, who notices the broken rear light before you do and rushes to help! Do you need more support?

With the above-mentioned vehicle type, the radiator fan may switch on of its own accord and does not switch off. It is also possible for the radiator fan to be activated after a longer stationary period of over an hour.

With the above-mentioned vehicle type, it can happen that the vehicle electronics fail. Malfunctions in systems such as the parking aid, radio system, air conditioning, electric tailgate and the instrument cluster are possible.

From the end of 2014, all new vehicles have a tyre pressure monitoring system on board as standard. It provides a warning about insufficient tyre pressure and protects the driver against increased fuel consumption and tyre damage. 

If the TPMS warning lamp lights up on the above-mentioned vehicle and the error code C1010/C1012/C1014/C1015 (TPMS system) is stored in the control unit, a software update can provide a remedy.

Are you suddenly in the dark during a repair? Our HELLA Hero in blue and yellow is just what you need and will quickly bring you back to light! Do you need further support?

If the Check Engine warning lamp suddenly lights up on the above-mentioned vehicle, this may be related to a fault in the DC/DC voltage converter. The first step is to read out the error memory using a diagnostic device (e.g. Hella Gutmann mega- macs X).

When replacing the cabin filter in the above-mentioned vehicles, there are a few special features to bear in mind:

• Remove the right panelling from the centre tunnel
• Remove the panelling under the glove compartment and also disconnect the footwell lamp connector

Every driver is familiar with the "dipped beam" and "main beam" lighting functions. In addition, modern lighting systems offer further possibilities for light distribution and, in compliance with legal requirements, bring out the maximum possible in road illumination. Here you can find out what tips and tricks make this work and what new lighting functions, such as those for country road lighting, really entail.

The tyre pressure monitoring system may fail on the above-mentioned vehicle model. The system must first be re-initialised in order to run a check on it. This procedure depends on each individual vehicle type and details can be found in the vehicle operating instructions. If re-initialisation fails, first check the individual wheel electronics.