Data sheet | |
---|---|
Manufacturer | Volvo |
Vehicle model | V60 |
Engine | D4 2.0 16 V CDI | Engine code D4204 T5 |
Year of manufacture | 2010 - 2014 |
Symptom | Engine stalls with slight pressure on the accelerator pedal after cold start | No fault memory entry in the control unit |
Important safety note
If no clear mechanical or electrical fault can be attributed to the error mentioned above during vehicle diagnostics, one possible cause is a software error in the engine control unit. In this case, the software version must be checked and updated if necessary.
The problem has been identified by the vehicle manufacturer and rectified by upgrading the control unit software. In the event of a repair, please contact an authorized dealer. This defect may also occur in other models with the same type of engine.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful