Volkswagen Transporter - error code P062B and engine or pre-glow control lamp lights up
| Data sheet | |
|---|---|
| Manufacturer | Volkswagen |
| Vehicle model | Transporter T6 |
| Engine | 2.0-litre diesel |
| Year of manufacture | 2015 - 2019 |
| Symptoms | Power loss / engine in emergency mode |
Important safety note
Engine or pre-glow control lamp lights up / power loss / emergency mode
The following errors or error messages may occur in the above-mentioned vehicles:
- Engine control lamp lights up
- Pre-glow control lamp lights up
- Significantly reduced engine power
- Engine in emergency mode
- Error code P062B stored in engine control unit
In order to remedy this, all system-relevant components, the battery and the vehicle electrical system voltage should be checked. In addition, the error memories are to be read out/deleted. If this does not lead to the desired success, a software update of the engine control unit can be carried out to eliminate the problem. In such a case, it is advisable to contact a VW workshop.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful