Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
If the above-mentioned problem is identified, one possible cause may be a defective exhaust differential pressure sensor.
In order to exclude other possible causes of malfunction, electrical and mechanical system tests (in accordance with vehicle manufacturer specifications) and also an error code query using a suitable diagnostic unit should be carried out.
First perform a visual inspection of the plug connections/sensor hoses to check for contamination and damage and, if necessary, clean them with suitable cleaning agents. Alternatively, if damage has occurred, replace these parts in accordance with vehicle manufacturer's instructions.
If no other kind of malfunctioning is detected, the exhaust differential pressure sensor is to be replaced.
Hella article number
OE article number
6PP 009 409-231
059 906 051 A
Important:
For all this work, the appropriate repair instructions issued by the vehicle manufacturer are to be observed!
Sensor / tightening torque for screw/s (3.5 Nm).
Finally a test drive should be undertaken in order to run a check on the repair work.
Not helpful at all
Very helpful