VW T6 - power loss and engine limp home mode
| Data sheet | |
|---|---|
| Manufacturer | Volkswagen |
| Vehicle model | Transporter T6 |
| Engine | 2.0 TDI |
| Year of manufacture | 2015 - 2019 |
| Symptoms | Engine in emergency mode |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Power drops significantly, engine in limp home mode
In the above-mentioned vehicles, it may be possible that the engine starts poorly or not at all. The engine control lamp and/or the preheater control lamp will light up in this process. An engine power loss can be observed at the same time. Fault codes P062B and 20EE may be stored in the fault memory.
Check all system-relevant electrical and mechanical components, including the power supply to eliminate the issue. If a fault is not identified in this process, a software update may be necessary to eliminate the fault.
Update software using diagnostic devices including Hella Gutmann macsRemote Services or a pass-thru-compatible Mega-Macs series diagnostic device. Furthermore, registered access to the vehicle manufacturer's online portal is required. If the appropriate equipment is not available, please contact an authorised specialist workshop.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful