MCC Smart - replacing cabin air filter
| Data sheet | |
|---|---|
| Manufacturer | MCC Smart |
| Vehicle model | 450 |
| Engine | All models |
| Year of manufacture | 1997-2007 |
| Symptoms | Replacing the cabin air filter |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Changing the cabin air filter/pollen filter
Changing the cabin air filter on this vehicle requires some skill, otherwise the entire front mask has to be dismantled. Proceed as follows when renewing filter:
- Remove the ventilation grille on the right under the windscreen
- First turn the screw in the grille using a suitable tool in order to release the locking mechanism.
- Unclip the filler nozzle of the windscreen washer reservoir from the housing of the cabin air filter and put it to one side
- Unlock housing cover x2
- Remove the housing cover upwards
- Remove the cabin air filter
- Insert new filter, paying attention to the installation position
- Place the cover of the filter housing firstly at the bottom during installation
- Reassemble everything in reverse order
IMPORTANT
Please always observe in such cases the maintenance and repair notes provided by the vehicle manufacturer.
This may also be of interest to you
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful