Some vehicles of the type listed above may experience problems with interior temperature control.
This could be due to a defect in the blender flap motor. The drive or adapter plate between the motor and the flap may be damaged.
A repair kit (drive and adapter plate) can be used to restore the flap to full functionality. The dashboard does not need to be removed in order to perform this repair. Depending on the model in question, the center console may need to be removed and subsequently reinstalled. Once repair work is complete, basic setting of the motor/flap controller will need to be carried out.
The necessary spare parts and further information are available from the Peugeot dealer in question.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful