The criticism has been made that the airbag indicator lamp lights up in the above vehicles.
The following error codes may also be stored:
A possible cause could be a damaged cable strand in the airbag system (in the area of the rail system of the front seat adjustment).
Check the cable strand for damage. In doing so, check in particular for signs of abrasion.
If a cable strand is laid incorrectly (marked in figure 1), it may be damaged.
The work listed below must only be carried out by a specialist garage with the corresponding expertise.
(make sure the cable strand is correctly installed)
Figure 2
Figure 1
Figure 2
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful