Nissan Qashqai (J10) - warning lamp for ABS / ESP

Data sheet
ManufacturerNissan
Vehicle modelQashqai (J10)
Engine1.5 DCI
Engine codeK9K
Year of manufacture2007 - 2014
SymptomsABS / ESP warning lamp is activated while vehicle is being driven

Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.

ABS/ESC warning lamp activates while vehicle is being driven and error code C1130 is stored

The ABS/ESP warning lamp may light up sporadically on the above-mentioned vehicle series. After a restart, the warning lamp initially goes out again, but is reactivated after a short driving time.

Error code C1130 "Engine control unit - signal faulty" is stored in the error memory of the ABS/ESP control unit.

When this happens, there can sometimes also be a loss of performance.

In such a case, a connecting pipe clogged with exhaust residue may be the cause. The result is that the engine control unit sends the ABS/ESP control unit an incorrect torque signal and the warning lamp is activated.

The connecting pipe, which runs from the exhaust pressure sensor to the exhaust manifold, should be dismantled in accordance with the manufacturer's instructions and checked for excessive deposits caused by exhaust residues. The banjo bolt for fastening the connecting pipe to the exhaust manifold must also be checked for exhaust residue.

If the above-mentioned defect is detected, cleaning the connecting pipe and replacing the banjo bolt can remedy the situation.

Once the cause of the fault has been removed, delete the error memory and then carry out a test drive.

IMPORTANT
Please always follow the repair instructions from the vehicle manufacturer when carrying out such work.


This may also be of interest to you

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all

Very helpful

Please tell us what you did not like.
Many thanks. But before you go.

Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly! Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost there!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.