Mazda CX5 - Emergency release of the electromechanical parking brake
| Data sheet | |
|---|---|
| Manufacturer | Mazda |
| Vehicle model | CX5 (KE) |
| Year of manufacture | 2011 - 2017 |
| Symptoms | Emergency release of the electromechanical parking brake |
Important safety note
This is how you perform an emergency release of the electromechanical parking brake on a Mazda CX5
Vehicles equipped with an electromechanical parking brake have an emergency release that allows the workshop to release the parking brake if the system fails.
Emergency release procedure:
- Secure vehicle against rolling away
- Release the parking brake
- Disconnect battery
- Disconnect the electrical plug connections on the actuators of the rear axle brake callipers
- Undo and remove the screws on the actuator
- Carefully remove the actuator from the brake calliper
- Turn the spindle drive (1) in the brake calliper counterclockwise with a suitable tool until the brake pads have come off the brake disc and the brake is free to move.
The procedure is identical for vehicles with all-wheel drive. Repair and maintenance work on the brake system should only be carried out by a trained specialist in the automotive trade! Please always observe the maintenance and repair notes provided by the vehicle manufacturer in this context.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful