If complaints are made about the above-mentioned error and the engine goes into limp-home mode, the following fault codes could also be stored in the engine control unit.
Fault code:
- P0140
- P0571
- P0600
- P2101
A possible cause here is a too low battery voltage when starting the engine.
Remedial action involves checking/charging the battery or, if necessary, replacing it with a new one.
Finally the entries in the fault code memory are to be deleted with the appropriate diagnostic tool.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful