Kia Sportage - Error code P1820/1821/1822/1823/1824 and all-wheel drive not engaging
| Data sheet | |
|---|---|
| Manufacturer | Kia |
| Vehicle model | Sportage |
| Engine | All models with all-wheel drive |
| Year of manufacture | 2010-2016 |
| Symptoms | All-wheel drive does not engage |
Important safety note
Error code P1820/1821/1822/1823/1824 and all-wheel drive not working
On the vehicles mentioned above, the all-wheel drive may no longer engage. The error memory may contain error codes that refer to the switch actuator or are brought about by a faulty wiring harness.
The following steps should be taken to rectify the problem:
- If an all-wheel drive actuator from the manufacturer Keyang is installed, it is to be replaced (part no: 47810-3B520)
- If a Buhler actuator is installed, the actuator and its wiring harness (part no: 47891-3B310) should be changed
- After replacing the components, clearing the error memory and performing a test drive are advised.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful