In the above vehicles, the engine may cut out after briefly stepping on the accelerator pedal or running over a pothole.
What is striking here is that when the error occurs while reading the parameters, the injection volume drops to 0 mg/stroke.
The cause of the above error is an insufficient power supply to the engine control module, which is caused by a faulty fuse.
Fuses can be damaged through mechanical tension in the fuse box.
In this case, a hairline crack in the fuse (15 A) at slot 2.05 may be responsible for the error.
The problem can be remedied by replacing the faulty fuse.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful