In the above vehicles, "Brake light faulty" lights up on the info display.
Following a visual inspection, a defect is discovered on the third brake light (image 1).
Image 1.
The reason for this may be a break in the cable (image 2) around the cable bushing (tailgate brake light).
Image 2.
To remedy the problem, the cable harness should be professionally repaired or replaced.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful