Ford Focus - Instrument cluster failure
| Data sheet | |
|---|---|
| Manufacturer | Ford |
| Vehicle model | Focus 1.6i 16V |
| Year of manufacture | 2006 - 2010 |
| Symptoms | Uncontrolled failure of all displays and control lamps on the instrument cluster |
Important safety note
Ford Focus 1.6i 16V - Instrument cluster failure
If the displays on the instrument cluster fail at the same time as poor acceleration behaviour is detected in the vehicle models mentioned above, one cause may be a defective wiring harness in the area of the right-hand A-pillar.
- Performance loss
- Poor starting behaviour
- Starter temporarily without function
- Sporadic illumination of all indicator lamps on the instrument cluster
- By switching the ignition off and on, the defect may be eliminated for a short time
If other causes have already been ruled out during the fault diagnosis, the wiring harness and the plug connections should be checked and repaired or replaced if necessary.
Please follow the repair instructions from the vehicle manufacturer in this regard.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful