Dacia Duster - Side direction indicator failure | HELLA
Dacia
Dacia Duster
MY: 2010–2018
Side direction indicator failure
If there is a complaint regarding the failure of the side direction indicator (Fig. 1) on the above-mentioned vehicle, the cause could be a defective connection cable.
Fig. 1
If the cable is improperly routed (Fig. 2), shocks and vibrations etc. can cause the connecting cable or its insulation to chafe on sharp edges of the body or folded edges during driving until there is a cable break/short circuit.
Fig. 2
To analyze the fault, remove the wheel and the wheel arch liner (Fig. 3). Repair the defective cable properly. Then ensure that the cable is correctly routed (possibly consider applying edge protection).
Perform a function check, (Fig. 4).
Assemble in reverse order.
Fig. 4
Fig. 3
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful