BMW F33 - no sound output

Data sheet
ManufacturerBMW
Vehicle modelF33
Engine2.0i
Engine codeN20
Year of manufacture2015
SymptomsNo audio output and also no acoustic warnings 
Recommended toolmega macs X

Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.

Permanent loss of sound and sloshing noises in the vehicle interior

With the above-mentioned vehicle type, it can happen that the entire sound output in the car fails. And sloshing noises can also be heard in the vehicle interior while the car is being driven. 

If one of the above-mentioned complaints is present, the first step in troubleshooting should be to check the audio amplifier for moisture ingress. If traces of water are visible during the visual inspection of the amplifier, special attention should be paid to the water drainage in the area of the rear window lifters. 

If the water cannot drain away properly here, large quantities will collect in the water drainage system, which can in time overflow into the luggage compartment. Accumulations of dirt in the water drainage system and between the sill and the outlet can be the cause of this problem. 

Water can be poured onto the rear side windows in order to carry out a test. This gets into the water drains via the side windows and should be drained from there to the outside. During the test, water discharge in the area in front of the rear wheels must be recognisable. 

If the drains are blocked, cleaning and removing the lower plugs from the water drains can help. In order to carry out such cleaning, the sill panelling and the side underbody panelling must be removed in accordance with the manufacturer's instructions. After cleaning the components, the plugs in both water outlets must be removed. The water should then drain correctly again after these measures have been completed. 

If other components have been damaged by the water ingress, these are to be repaired in accordance with the manufacturer's instructions. The problem has been identified by the vehicle manufacturer and rectified during the course of a service campaign.  

This fault profile may also occur in other vehicle models with comparable equipment variants. 

Please note

Please always observe the maintenance and repair notes provided by the vehicle manufacturer when carrying out such work and checks!


This may also interest you

Reprinting, distribution, reproduction, exploitation in any form whatsoever or disclosure of the contents of this document, even in part, is prohibited unless our express permission has been obtained in writing beforehand and the source is stated. The schematic illustrations, pictures and descriptions are provided for explanatory purposes and are only intended as a visual supplement to the document text, so they cannot be used as the basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all

Very helpful

Please tell us what you did not like.
Many thanks. But before you go.

Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly! Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost there!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.