In this database, you will find technical information on our products and certain vehicle systems – compiled by experienced technicians and mechanics. You can search the database by entering multiple keywords, for instance the product, relevant system or components, and also filter the information using the categories (for example, lighting, electronics, etc.).
"Technical Information Page 1 of 3 © HELLA KGaA Hueck & Co., Lippstadt Reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and"
"1 © Hella KGaA Hueck & Co., Lippstadt Q4 / 2012 1-3 Technical Information Ultrasonic oil level sensor General This sensor is used to monitor the oil level by continuously measuring the engine oil level in the static an"
"1 © Hella KGaA Hueck & Co., Lippstadt Q4 / 2012 1-1 Technical Information Oil temperature sensor General Depending on the type of vehicle, oil temperature sensors may be installed in addition to oil pressure sensors in som"
"1 © Hella KGaA Hueck & Co., Lippstadt 04 September 2012 1-2 Technical Information Intake manifold pressure sensor with integrated intake air temperature sensor General The intake manifold pressure sensor measures the intake manifold vacuum that exists "
"1 © Hella KGaA Hueck & Co., Lippstadt 04 September 2012 1-2 Technical Information Oil pressure switch General The oil pressure switch is installed in the oil circuit of the engine. It monitors the oil pressure and turns off or on a warning light or co"
"1 © Hella KGaA Hueck & Co., Lippstadt June 29, 2011 1-2 Technical information Information on Hella signal horns General instructions on the correct mounting of the signal horns • To avoid problems with the tone qua"
"1 © Hella KGaA Hueck & Co., Lippstadt 15. Juli 2002 1-4 Technical Information Accelerator pedal position sensor General On mo"
"1 © Hella KGaA Hueck & Co., Lippstadt 1. Dezember 2004 1-1 Technical Information Connector seal General information One frequently occurring problem is the rubber seal falling out unnoticed when the connector is pulled "
"1 © Hella KGaA Hueck & Co., Lippstadt 17 August 2006 1-1 Technical Information “Pasting-up” of starters Damage If a “pasting-up” of starters occurs, this may be noticed due to increased noise development and damaged sta"