LED Retrofit
LED Retrofit installation instructions and legal information
This page contains valuable and useful information for garages on the design, function, and diagnostics of the LED Retrofit.
HELLA LED Retrofit light sources can be used to retrofit LED technology in place of halogen vehicle lighting.
Important safety note
The following technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for suitably qualified personnel only.
TABLE OF CONTENTS
LED Retrofit: BASICS
Even in the age of state-of-the-art LED lamps, many vehicles still have halogen lamps, also known as incandescent bulbs.
HELLA LED Retrofit light sources can be used to retrofit LED technology in place of halogen vehicle lighting. These LED retrofits offer exceptional brightness – and with increased illumination, more light shines on the road. In addition, a longer lifetime compared with halogen bulbs makes LED retrofits a great option for any driver.
Stylish optics with a cool white light cone give customers a daylight effect at night and make the driving experience more comfortable and enjoyable.
Design and function: FUNCTION
These Retrofit light sources have a built-in electric fan motor and a high-quality anodized aluminum heat sink that provides a large radiation surface. This enables effective heat dissipation, reducing the risk of overheating and ensuring optimal brightness at all times during operation. In addition, an integrated constant current driver prevents overheating by dimming the LED when temperatures increase. The Retrofit lamps are designed for 12V and 24V applications.
1. Light fixture with integrated overheating protection
2. Built-in fan for active ventilation
3. Aluminum heat sink designed for large radiation surface
Installation instructions: Important information
These Retrofit light sources are designed for insertion into the lamp retainer.
Ease of installation depends on the vehicle model or lamp and the clearances these provide. The vehicle's operating instructions may contain helpful information.
Note for drivers!
Many drivers change their own bulbs.
However, if you are not familiar with the processes and procedures, we recommend that you take your car to a garage to have the Retrofit light sources installed.
Note!
When doing so, please observe the maintenance and installation instructions issued by the respective system and vehicle manufacturer. Where necessary, use the installation or removal tools specified by the vehicle manufacturer.
Legal information: Basics
Observe the legal requirements and regulations before buying and installing an LED Retrofit light source for your vehicle. This product is approved for off-road use only. Use on public roads can lead to loss of the operating permit and insurance coverage.
Please observe the applicable country-specific legislation for vehicle lighting. It is your responsibility to comply with local legal requirements.
HELLA accepts no liability for damage caused by improper handling or incorrect installation of the product!
How helpful is this article for you?
Not helpful at all
Very helpful