Data sheet | |
---|---|
Manufacturer | Volkswagen |
Vehicle model | Transporter T6 |
Engine | 2.0 TDI |
Year of manufacture | 2015 - 2019 |
Symptoms | Loss of coolant |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Upon identifying a steady coolant loss in the above-mentioned vehicles, check all coolant hose connections and the radiators for leaks. We recommend pressurising the cooling system with a suitable tool according to the manufacturer's specifications.
When identifying the leak, pay special attention to the thermostat housing. Coolant loss here may be caused by a faulty O-ring. When replacing the O-ring, make sure that the contact surfaces on the thermostat housing and engine block are sufficiently cleaned.
The cooling system must then be filled and vented according to the manufacturer's specifications.
Simultaneously also replace the thermostat when replacing the O-ring (06B1211119B)
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful