CAUTION Risk of burns. The lamps may still have residual heat from previous operation.
Figure 1:
Replacing the rear combination lamps.
To replace the lamps, proceed as follows:
(Figure 5 / 6) and remove
Do not touch the glass bulbs of the lamps with bare hands (use a suitable soft cloth).
-Direction indicator lamp = 12V 21W yellow
-Rear combination lamp = 12V 21/5W
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful