If a complaint is made regarding the above-mentioned fault in one of these vehicles, the possible cause is bad contact on the 12-pin multiple connector of the instrument panel.
Fault analysis is to be carried out by visibly checking the 12-pin multiple connector of the instrument panel. If the multiple connector has a transparent cover, it is to be replaced by the modified model provided by the manufacturer.
In addition, the electrical contacts / leads in the area of the instrument panel are to be visibly checked to ensure proper plugging in and correct cable laying.
Connector cover:
Spare part no.: 61.13.8.365.906
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful