Data sheet | |
---|---|
Manufacturer | Mercedes |
Vehicle model | Vito/Vitano (639) |
Engine | 109CDI/111CDI |
Year of manufacture | 2006-2010 |
Symptoms | Sudden loss of power |
Recommended HGS tool | megamacs X |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
With the above-mentioned vehicles, a sudden drop in engine performance may occur after the operating temperature has been reached. Often no error is stored in the control unit.
A defective fuel temperature sensor can be the cause of the trouble.
If the sensor is defective, it supplies incorrect values to the control unit. The sensor values can be determined using a diagnostic device (e.g. Hella Gutmann mega macs X) via the "Measured value blocks" function. However, if the value shows 60 °C at an engine and outside temperature of, for example, 10 C°, the value can increase to over 100 °C after a long journey. As plastic parts or cables can be damaged at such a temperature, the control unit "switches" the engine to emergency running mode as a result of the incorrectly measured value.
In order to remedy this, the fuel temperature sensor (which is installed on the high-pressure pump) should be replaced and a test drive carried out. Any existing error code entries have to be deleted.
This information may also apply to other vehicle models or other engine types.
Please always follow the repair instructions from the vehicle manufacturer when carrying out such work!
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful