In such a repair job, the customer complains that the above-mentioned problems occur after removing the vehicle key.
If the gear selector lever is set to the "P" position, the system will not recognise the parking position.
If this is the case, the parking position switch is defective and must be replaced.
In order to exclude other possible causes of malfunction, electrical and mechanical system tests (in accordance with vehicle manufacturer specifications) and also a fault code query using a suitable diagnostic unit should be carried out.
Please note that the vehicle manufacturer's repair and maintenance instructions are always to be observed and that such repair work should only be carried out by an authorised specialist workshop.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful