Lexus IS250/IS350 - Condensation in interior | HELLA

Lexus

IS250/IS350

Model year: 2006 - 2007

Condensation in interior

On the above vehicles, a blocked condensation drain in the air-conditioning system can lead to an ingress of water in the vehicle interior.

If significant levels of humidity ingression are noticed in the interior (carpets), a blocked condensation drain should be considered as a potential cause.

Accessing the condensation drain is a highly complex task.

In addition to the example procedures described here, other, manufacturer-specific information will always be required. Depending on the model and variant (2WD/4WD), it may be possible to use the following procedure.

  • Lift the vehicle up using a lifting platform
  • Clip out the electrical cable for the O2 sensor
  • Unscrew the exhaust from each part of the Y-pipe and prop up
  • Remove the transmission support and prop up the transmission
  • Remove the front drive shaft (all-wheel drive only)
  • Lower the transmission a few centimeters
  • If necessary, remove the gear lever

You can see the condensation drain if you stand on the transmission side and look at the vehicle undercarriage, above the transmission (see drawings).

You can now clean the grommet for the condensation drain using a long, blunt object or replace it with a modified version. For more information, please contact your authorized dealer.

Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all

Very helpful

Please tell us what you did not like.
Many thanks. But before you go.

Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost there!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.