The lamp has no moving parts, such as a rotating mirror, etc. As a result there is no wear, and the lamp has a maximum of reliability.
During installation of the fixed body variant
make sure that the cables passage to the Interior is sealed. This can be done, for example,
with a suitable rubber grommet or body sealant.
When using the magnetic variant, a few points should be observed, see Figure
Technical notes
The beacon must be protected with a 5A fuse!
Product overview
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful