If the above-mentioned problem is detected, one possible cause may be an incorrect/defective tyre pressure sensor.
In such a case, the wrong tyre pressure sensors have been used for the winter wheels.
In order to exclude other possible causes of malfunction, electrical and mechanical system tests (in accordance with vehicle manufacturer specifications) and also a fault code query using a suitable diagnostic unit should be carried out. (Error codes have not been stored in the engine control unit)
If no further malfunctions are detected, the tyre pressure sensor for each tyre (i.e. 4x) (OE No. 5Q0 998 270) has to be replaced.
Please always observe the manufacturer's instructions.
Tip: tightening torque for screw/s on sensor (4 Nm).
Finally, a test drive should be undertaken in order to run a check on the repair work.
High-voltage components - risk of accident and injury (electric shock)!
Please note that such repair work should only be carried out by an authorised specialist workshop and that the vehicle manufacturer's repair and maintenance instructions are to be observed!
Please note:
Other models similarly affected are:
-Passat (3G_)
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful