If the defect described above occurs together with the listed error codes, a possible cause may be a defective plug connection of the accelerator pedal sensor.
In this case, we recommend the following procedure:
Note!
In this context, is is possible that additional error codes are displayed in the control unit:
P0226, P0227, P0228, P1631, P1632, P1633, P1634, P1639, P2123, P2127, P2128, P2135, oder P2138.
Example: parameter display in mega macs 66 diagnostic unit. Error-free signal curve following confirmation of accelerator pedal sensor
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful