Noise may be coming from the engine compartment in the above vehicles when the engine is running at operating temperature. This occurs in particular during acceleration of the vehicle and an engine speed between 2000 and 3000 rpm.
The cause may be a missing or misplaced damper strip between the frame rail and the refrigerant line.
Make sure that the damping strip is present and correctly installed. If necessary, attach a new damping strip. When doing so, make sure that the refrigerant line does not come into contact with the frame rail.
Otherwise, the flow noise of the refrigerant may be transmitted through the body into the vehicle interior. It is important to ensure that the damping strip extends approx. 5mm beyond the edge of the frame rail.
Note: A suitable damping strip is Hella part no. 9MJ 351 018-011
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful