If there are complaints for these vehicles that the engine jerks, experiences loss of power and the error code P1106 is stored in the engine control unit, it is possible that the cause of failure is a defective or faulty atmospheric pressure sensor.
- Visually check the manufacturer number on the atmospheric pressure sensor. The atmospheric pressure sensor needs to be replaced if the manufacturer number is 261002137.
In this case, Hella sensor -
Hella No.: 6PP 009 400-461 can be used.
Technical note for the atmospheric pressure altitude sensor:
In order to prevent an overrich fuel-air mixture, the injection time is reduced as the sensor voltage increases.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful