There may be a loss of engine power in the above vehicles, in which case the engine malfunction indicator lamp also lights up.
The following error codes are stored in the engine control module:
· P2282 meaning leak-in of air between butterfly valve and inlet valve
· P2458 meaning diesel particulate filter, regeneration process, malfunction of timeframe
If a visual inspection of the engine compartment shows that the charger intake hose has come loose from the base of the intercooler, the reason for this may be a faulty clamp.
The clamp may not be clamping sufficiently.
To solve the problem, the connection should be cleaned and a screw clamp should be used to fix the hose in place.
The vehicle manufacturer has already addressed the issue.
Screw clamps are being used in production from Vehicle Identification Number: WOLGT8EM1A1109304.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful