Nissan Juke - oil consumption: Oil level warning lamp lights up
| Data sheet | |
|---|---|
| Manufacturer | Nissan |
| Vehicle model | Juke (F15) |
| Engine | 1.2i |
| Engine code | HRA20DDT |
| Year of manufacture | 2010 - 2020 |
| Symptoms | Oil level warning lamp lights up/Oil requirement |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Oil level warning lamp comes on in Nissan Juke
If the warning lamp for the engine oil level lights up on the vehicles mentioned above, the oil level must be checked immediately and, if necessary, oil must be added. Checking the oil level at regular intervals is recommended. If the oil level is detected as being too low repeatedly, this may be caused by the induction pipe pressure being too low.
Check all system-relevant electrical and mechanical components, including the power supply, to eliminate the issue.
If a fault is not identified in this process, a software update may be necessary to eliminate the fault.
Software can be updated using Hella Gutmann macsRemote Services or a pass-thru-compatible Mega-Macs series diagnostic device. Furthermore, registered access to the vehicle manufacturer's online portal is required. If the appropriate equipment is not available, please contact an authorised specialist workshop.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful