Data sheet | |
---|---|
Manufacturer | Mercedes |
Vehicle model | C-Class (205) |
Engine | All models |
Year of manufacture | 2018 - |
Symptoms | ABS/ESP control unit does not switch off |
Important safety note
On the vehicles mentioned above, the ABS/ESP control unit may not return to its idle state after the ignition is switched off.
If other causes of error can be ruled out, it is possible to remedy the issue by following the procedure below:
If the procedure does not lead to success, a software update may remedy the issue. We advise you to contact a Mercedes-Benz partner for this.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful