If a complaint is made about the engine in the above vehicles cutting out while moving, this may indicate a defect in the camshaft sensor. In addition, the cruise control does not work, the engine malfunction indicator lamp lights up and the speedometer and/or revolution counter do not work.
The following error code is entered in the engine control module:
camshaft position sensor A, cylinder row 1,
sensor/emitter loose, air gap, cable harness.
In order to remedy this, the camshaft sensor and the supply line between the sensor and the engine control module should be checked for interruptions and short-circuiting, and should be replaced if necessary.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful