If the problem described above is identified, one possible cause may be a malfunctioning of the unlocking mechanism in the driver's door.
In such a case, the unlocking wire has loosened itself from the installation position.
Repair notes
First remove the door trim panel (driver's door side) in accordance with the vehicle manufacturer's specifications.
Place the unlocking wire in the correct installation position and fix it securely with a cable tie. (see photo)
Carry out a visual inspection of the entire unlocking mechanism and repair if necessary.
Reassemble the door trim panel in reverse order to its dismantling.
Finally, a functional test of the repair work should be carried out.
IMPORTANT:
Please note that such repair work should only be carried out by an authorized specialist workshop and that the vehicle manufacturer's repair and maintenance instructions are to be observed!
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful