If one or more of the above problems are identified on this vehicle model, this may be associated with a bad control of the exhaust gas recirculation valve due to a broken wire of the engine wiring harness. In this case, the wiring harness and the 3-pin connector at the EGR valve should be checked, repaired or replaced.
Please note, in this context, the installation/removal information and the testing instructions of the vehicle manufacturer.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful